We take your privacy very seriously, please agree to all cookies used when you visit our website. More information about the processing of personal data could be found inPrivacy Policy

Product
cheguijicansic+bar_EN.jpg

Product

Isolated Current Sampling ADC with High Reliability

The NSI1305 is a high performance Σ-Δ modulator with output separated from input based on the NOVOSENSE capacitive isolation technology. The device has a linear differential input signal range of ±50mV (±64mV full-scale) or ±250mV (±320mV full-scale). The differential input is ideally suited to shunt resistor-based current sensing in high voltage applications where isolation is required.

The analog input is amplified and continuously sampled by a second-order Σ-Δ modulator and converted to a high speed, single bit data stream. The output data is synchronous to the external clock with a frequency range from 5MHz to 21MHz. By using an appropriate digital filter (such as sinc3 filter) to decimate the bitstream, the device can achieve 16 bits resolution and an 86dB/82.5dB signal to noise ratio (SNR) at 78.125kSPS with a 20MHz master clock. 

The fail-safe functions including input common-mode overvoltage detection and missing AVDD detection simplify system-level design and diagnostics.

Product Features

• Up to 5000VRMS Insulation Voltage

• Clock frequency: 5MHz to 21MHz

• ±50mV or ±250mV Linear Input Voltage Range

• Excellent DC performance:

            • ±50mV or ±250mV Linear Input Voltage Range

            • Offset Drift: -0.5~1.5μV/℃ (Max)

            • Gain Error: ±0.2% (Max)

• Gain Drift: ±40ppm/℃ (Max)

• SNR: 82.5dB or 86dB (Typ)

• High CMTI: 150kV/μs (Typ)

• System-level diagnostic functions:

           • AVDD monitoring

           • Input common-mode overvoltage detection

• Operating temperature:  -40℃~125℃

• Package: SOP8(300mil)/SOP16(300mil)

Safety Certificate

• UL recognition: up to 5000Vrms for 1 minute per UL1577

• CQC certification per GB4943.1-2011

• CSA component notice 5A approval IEC60950-1 standard

• DIN VDE V 0884-11:2017-01

Application

• Shunt current monitoring

• AC motor controls

• Power and solar inverters

• Uninterruptible Power Suppliers

• Automotive onboard chargers

Functional Block Diagram

m25-功能框图.png

For more product information, please contact us.

CONTACT US

Thank you for your inquiry.

Please provide the following information and we will contact you as soon as possible, thank you.

Industrial
Automotive
Personal Electronics
Enterprise & Communication
Signal Chain
Sensor
Isolator
Interface
Driver
Power
Power Management
Others
I have read and agree to Novosense Private Policy